My hands felt just like two balloons....

Not much to report, after a stupid overdose of BOTH my Tramadol and Co-Codamol, i woke up on Wednesday afternoon and immediately puked, nearly passed out,on toilet floor, and then crawled back into bed where i then spent most of the last 2 days doing a Heath Ledger (semi conscious on the bed) so obviously no progress on the woodworking..

I feel a bit better now though, but this is the second time I've doubled up on my tablets and this time they were only 2 hours apart, so I really need to find some way to control my meds, especially those i take first thing in the morning, on auto pilot, or next time I may well be "dead in the bed"..

The perspex for the lid arrived, wasn't in a padded envelope (bloody ebayers) but its pristine and covered in a removable film so its crystal clear. Still no sign of the mitre saw i ordered, hopefully tomorrow?

Nipped out to homebase today, got some new jigsaw blades to redo the MDF, we'll see if these ones cut better and the others were blunt as suspected, saw some nice other stuff there, but didn't really want to commit to anything else, as they have a 15% sale starting tomorrow, so it was more a recon mission than anything purchased.

In other news, my two copies of FIFA 09 arrived, so if I'm feeling well enough to go out I'll be booting the bladder into the onion bag tomorrow evening with Lee,

Which means I'll really have to get on with the box in the afternoon, before again I run out of daylight and end up doing something else or crawl back into bed..

See you then...

IMPORTANT NEWS!!

MY FIGHTSTICK IS FINISHED, PAINTED AND UP AND RUNNING....
















April fools..

:-(

Measure twice, Cut once...!!!!!!!!!!

Yep, my fantastic measurements ensured that as soon as I cut out a cardboard template of the sides of my box just to check the button clearance, it soon became apparent that the fucking thing was completely wrong!!

It was not only too small height wise, but the angle was bringing the middle down so far that the buttons would protrude out of the bottom and through the base..

I guess it wouldn't have been too uncomfortable with the prongs of the micro switches jambed into my leg flesh.. gulp!!

So out comes sketchup again and some proper measurements and angles are calculated... And this is what we get.

A plan showing the side of the box, with correct heights, free space below button plunger and base of box... Yipee...

.

I still like this Sketchup thingy as an alternative to a cad program, i'm going to highly recommend it to all, budding designers should really give it a go, I can see where google are aiming it, its great for turning doodles into 3d objects and seems to include the experts by then exporting them to 3d rendering or cad programs too, probably not as powerful for modeling but makes sense to a non cg pro.. I havent even checked out the Pro version, this is just the free one!

Ok, plan With X ray into Removed Lid and Button top, plus perspex.. Perfect..



Also found my jigsaw is shit for cutting MDF... Arghhhhhhh, now i really want the exaktsaw, after watching it eat floorboards, it would have precision cut my stuff like butter.. Bollocks..

Decided on the final layout for the panel, and have measured it all up properly, going for the JAP style curved button Sega arcade layout, as its better on the fingers and am going to do all 8 buttons rather than the 6 button layout to incorporate the rear shoulders as well, you never know which future fighting games are going to need them and i don't want to start having to drill extra buttons into it later..





Anyhoo that's it for today, was too dark to do any proper cutting so we're off again tomorrow...

Byeee...

You want Sketchup on those?

Just a quick update, had a good look at google sketchup as an alternative to a cad package... Not too shabby once you get to grips with it.. Those with x,y,z spacial brains will get it instantly, those who just watch others rendering will find it all a bit daunting at first..

Anyhoo, a quick knockup of the controller, still needs some rounded edges and some chamfering but its mainly to get a grip on the measurements and make sure everything fits inside it..





One wireframe and one filled view..



Fairly pleased so far.. All is proceding according to my designs [/palpatine]

Night Night..

Lazy days.. Still cost money..

Ok its sunday so bit of a rest day, was up all night and we lost an hour due to the clocks going forward, so after watching the 6am Australian F1 i needed some sleep, so didnt get time to work on my box today after all..

I've ordered some more bits and bobs to get things looking a bit "nicer", still havent decided on the finish of the box, but i'm going for glossy white, so it doesnt look wood/mdf, if i can get a nice sanded shine on it it might look like sturdy plastic.. We'll see...

Anyhoo, i wanted one of these "exakt saws", they cut to a set depth and you can set the blade exposure which means you could stick it against the wall and cut out a box if you wanted, or cut a plank on the floor with nothing underneith, it just seems worth it for the fact you dont need a workbench or a jigsaw protruding through the wood, and the cuts are of such a quality the back end of the wood has no splintering and you can cut plastic and tiles without any cracking... Well i cant afford one at the mo, but its def going on the shopping list for later..

For now, we'll stick to the old faithful mitre saw, i've found a nice cheap adjustable one that should help the "edging of my box", and allow me to slope the controller a bit.. Rather than just a flat square, i can give it a bit of "flavour", and "think outside of the box"... *cough*

So this is the saw i've ordered, i'll start cutting up the MDF tomorrow as long as its not pissing with rain....

TTFN!!

Hacker for hire!!

Ok I ordered a controller online from the USA from a guy called Lee Speer (HARUMAN) at the Arcade Controlls forum I joined for info..

http://forum.arcadecontrols.com/index.php?topic=76185.0

Ok so after a strange delivery from the US postal system who sent it to Indonesia by mistake instead of the UK!! the 3rd party controller has arrived and it was time to get this Madcatz rubbish checked out..

The Madcatz intact...




Get the cover off this baby and get the pcb out and stripped down and we are left with...





Not too shabby, and with a common ground its fairly easy to wire up.. this is what we should end up with..





Haruman has added some plasticy glue over the contacts to protect them..




Ok So what have i got for my money, I have the contacts done, analogues have been have been left intact but i could have nullifyed them with 5ohm fixed resistors, and shoulder buttons have been converted to digital instead of analogue triggers..

Just gotta get the connector blocks sorted and we'll get to wiring up the box panel..

Before that need to build the box.. Now i've got everything to go into it, i can get to start sizing up and sawing all that wood up..

Check back for more..

Have a look at my bits....

Ok the bits have begun to arrive, so lets get the box open, get down to wickes and see what we've got....

First of all, I guess i'll need a mask to protect my weedy lungs from the poisonous MDF dust, did anyone else know it was toxic, nope me neither, oops..

Got me some connector blocks, these will be used to connect the 360 controller guts to the arcade stick and buttons, as you'll see later!!

Wires and crimps for connecting to the microswitches on the arcade bits, the non crimped ends will go into the connector blocks..

Check out my balls.. ok ball, this is the handle for the stick, as my stick will be white and red, i'm going for a red ball..

A couple of mini buttons for the pad, i'm going to use these for the back and start buttons, they'll be seperated by a proper Guide button which i'll rip from the madcatz and bodge together somehow..

I decided to get a proper arcade cradle/cable to connect the stick properly, as it has a pin out connector it makes sense to use one of these rather than hard wiring it....

And the Buttons for the controller, i was going to go with all white, or all red, but then at the last minute decided to copy the xbox style colours A.B.X.Y shoulders etc, its going to be a 360 stick after all so i might as well try to emulate the styling as much as possible..

Finally, the mother of all sticks, the Sanwa itself, smooooooooth...

So thats it all for now, i've got the MDF sheeting and some adjustable drill bits to make the button holes, now all i need is the Madcatz pcb out of the 3rd party controller, to wire that up and to start to build the box..

After that its painting and decorating (again).. ;-)

And so it begins...

A NEW PROJECT!! woot...

Ok, I'm sick of my 360 controller, sick of its shitty d-pad and its random analogue stick and mostly its lack of ability to let me EVER pull a fucking fireball, super or ULTRA in street-fighter4.... Sick to the back teeth..

Soooooooo, i decided to get myself an arcade stick.. Until.... The Price..

The rubbish "Madcatz" have hyped everyone into buying some new piece of tat, by putting a shit one up alongside a mega expensive one with a load of expensive Japanese parts in a madcatz box and calling them the Fightstick (the cheaper option) or the Tournament Edition. (The one you should buy!!)

Well at £80 and £150 notes I'm not that hyped after all.. And even if i could afford one, it seems they're not ALL they're cracked up to be after all....

Option 1, The Fightstick..



Whats good, not much, most people will see it as the younger brother of the TE and think its got the same bits under the hood, well it doesn't actually contain ANY arcade machine parts, the external controls and internal components are from madcatz themselves, and as such is pretty much a standard stick with cheapish clunky buttons, it doesn't review that well, it isn't easy to find, is overpriced IMHO and most people when they realise its not a patch on the TE then say you should buy it, gut it and put in a proper stick and buttons from Sanwa at extra cost.. WTF!!!


Option 2 : THE TOURNAMENT EDITION!!

Whats good, Well it looks the bollocks, contains actual arcade Sanwa parts (though not the "best" ones you'd really really want for the double price) but again is rarer than a vegetable on Lee's dinner plate and now seems to sell on eBay for about £500 instead of the proper £150..

The verdict...

Neither!

So i went looking, why bother buying the madcatz sticks just for the expensive parts if you could just rewire a standard 360 controller, get/build/make a box, buy the parts yourself from japan and bingo your own arcade stick... Just how you want it, and at about the same cost as the standard fightstick with superior parts to the TE..

A lot of googling, head scratching about how wireless, wired and the 3rd party (i.e. cheap) 360 controllers work, how and if i could rip one to pieces and solder it to proper arcade parts so the 360 sees it as a standard controller, how and where to get those arcade machine Sanwa and Haap associated Joysticks and Buttons from, so not much of a project really, more of a breeze!! Get bits, chuck in box, stir, add a bit of solder, bish bosh, done..

But seriously, I've investigated and found the information I need, I've got most of the skills (and what I dont have i can learn) to do the hardware work, and as such I'm ready to embark on my new project... A home made, but hopefully quality Arcade Stick for the 360!! And as such "so it begins"... More as I progress..